請選擇投遞簡歷的方式：
附件簡歷推薦
點擊上傳簡歷文件，直接投遞崗位
在線簡歷
缺少“教育背景”、“工作經歷”
職位概要：
To perform a wide variety of Quality Engineer support functions for the Quality Manager；apply detailed program knowledge in collecting and/or creating reports using customer information; providing liaison between the customer and Kirchhoff Suzhou; completing corrective actions; coordinating continuous improvement projects; on going TS 16949 maintenance and perform assigned work as required.
主要職責：
l Customer liaison for plant visits, customer issues/corrective actions
l Coordinate continuous improvement/scrap reduction projects
l Join in the project development, and support to prepare PPAP document and other reports by customer requirements.
l Initiate/track and pursue to closure internal corrective actions
l Maintain TS 16949 documentation requirements including work instructions, procedure changes, process changes
l Plans and directs activities concerned with development, application and maintenance of quality standards for processes, materials and products.
l Comply with ISO14001 requirements
l Advise the Production Division on questions pertaining to product quality (pressing, welding etc.)
l Conducting process and product quality audits (comprehensive and partial)
l Training of employees in quality assurance and products
l Drawing up and overseeing inspection plans according to control plan and part drawings, (incoming, stamping and welding parts)
l Fault analysis and assessments
l Customer support (discussions on quality, co-ordination of rework)
l Write gauge work instructions, train staff on proper use of gauges,
輔助職責：
任職資格：
l Bachelor degree, preferably in welding engineering technology field
l 4-6 years experience in automotive quality
l Must have welding and stamping process experience.
l Must have good computer skills-Word, Excel, SPC software
l Excellent oral and written communications skills especially for customer interaction
l Carry out duties with limited/no supervision
l Able to travel
To perform a wide variety of Quality Engineer support functions for the Quality Manager；apply detailed program knowledge in collecting and/or creating reports using customer information; providing liaison between the customer and Kirchhoff Suzhou; completing corrective actions; coordinating continuous improvement projects; on going TS 16949 maintenance and perform assigned work as required.
主要職責：
l Customer liaison for plant visits, customer issues/corrective actions
l Coordinate continuous improvement/scrap reduction projects
l Join in the project development, and support to prepare PPAP document and other reports by customer requirements.
l Initiate/track and pursue to closure internal corrective actions
l Maintain TS 16949 documentation requirements including work instructions, procedure changes, process changes
l Plans and directs activities concerned with development, application and maintenance of quality standards for processes, materials and products.
l Comply with ISO14001 requirements
l Advise the Production Division on questions pertaining to product quality (pressing, welding etc.)
l Conducting process and product quality audits (comprehensive and partial)
l Training of employees in quality assurance and products
l Drawing up and overseeing inspection plans according to control plan and part drawings, (incoming, stamping and welding parts)
l Fault analysis and assessments
l Customer support (discussions on quality, co-ordination of rework)
l Write gauge work instructions, train staff on proper use of gauges,
輔助職責：
任職資格：
l Bachelor degree, preferably in welding engineering technology field
l 4-6 years experience in automotive quality
l Must have welding and stamping process experience.
l Must have good computer skills-Word, Excel, SPC software
l Excellent oral and written communications skills especially for customer interaction
l Carry out duties with limited/no supervision
l Able to travel
職位類別： 品質工程師(QA/QC工程師)
舉報
全選
申請職位
-
8-9.9K/月申請職位Key Accountabilities : 1.Carry on the Advance quality management in new project according to the customer APQP and BOS PEP+. 新項目時，根據客戶的APQP以及公司的PEP+流..
-
面議申請職位崗位職責：1. 負責新項目質量檢驗計劃制定，過程控制； Responsible for creating quality inspection plan of new projects Process quality control2. 持續改進，顧客投訴..
-
面議申請職位崗位職責：1. 負責新項目質量檢驗計劃制定，過程控制； Responsible for creating quality inspection plan of new projects Process quality control2. 持續改進，顧客投訴..
-
面議申請職位Job Description: 1. Responsible for creating quality inspection plan of new projects Process quality control; 2. Continuous improvement, reply customer claim, Intern..
-
面議申請職位Responsibilities 崗位職責 Incoming Parts Inspection 來料檢驗 Completes incoming parts inspection instruction 制定來料檢驗指導書 Sets up related inspect..
-
面議申請職位Manage all production process quality and product quality in the center production.  Manage all related projects quality..
-
1.5K以下/月申請職位主要職責:1、向客戶提交PPAP；2、編寫并維護質量文件；3、主持質量問題分析會議，跟蹤解決各種質量問題；4、領導客戶保護小組；5、處理客戶抱怨,提交原因分析和整改報告，并跟蹤整改的實施；6、參與..
-
面議申請職位GENERAL SUMMARY : The quality engineer is responsible for facilitating extrusion quality which is core process in plant. Extrusion QE is expected to judge the q..
-
5-8K/月申請職位Responsibilities 崗位職責： Customer Quality Response Process 客戶質量反應流程 Builds, trains, and manages customer quality team, establishes the quick response process..
-
面議申請職位崗位職責： 1. 維護TS 16949體系， 建立有 ISO 14001 & OHSAS18001 體系； 2. 接待外部客戶審核； 3. 主導公司內部的各種審核，推進持續改善； 4. 質量主管委派的其他事務，如處理內外部..
- 公司性質：股份公司
- 所屬行業：零部件
- 所在地區：江蘇-蘇州市-蘇州工業園區
- 聯系人：Jonnie Ge
- 手機：會員登錄后才可查看
- 郵箱：會員登錄后才可查看
- 郵政編碼：215121
工作地址
- 地址：蘇州工業園區涇東路35號
