請選擇投遞簡歷的方式：
附件簡歷推薦
點擊上傳簡歷文件，直接投遞崗位
在線簡歷
缺少“教育背景”、“工作經歷”
德資企業，生產汽車線束，全球工廠20多家，中國區工廠在上海松江。公司產品競爭力強，管理規范、人性化。
崗位職責Responsibilities:：
1.支持銷售和了解客戶應用程序和要求。實施適用的產品測試計劃以確保產品符合功能、 質量、 可靠性和機構的要求。
Support Sales/Marketing and understand customer application and requirements. Implement applicable product test plan to ensure product conformance to functional, quality, reliability and agency requirements.
2.初始設計失效模式分析預驗證和初始圖紙繪制
(Make DFMEA/e-Validation/ preliminary drawing)
3.培訓工程師相關的產品知識，工程程序和技術技能。
Train engineers on related product knowledge, engineering procedures and technical skill.
4.使用適當?shù)姆治龉ぞ邅?lái)分析和解釋數據，并得出相關結論。審查并驗證任何測試結果、 數據分析和結論為特定項目充分和準確。
Use appropriate analytical tools to analyze and interpret data, and reach relevant conclusions. Review and verify that any test results, data analysis and conclusions for a specific project are adequate and accurate.
5.發行二維和三維圖紙,制作手工樣品
Release 2d/3d approved /Make prototype when needed
6.與設計中心及兄弟工廠溝通協調，共同完成設計方案
Communicate with global design center and sister company design center to develop the design solution
7.處理公司內部或客戶郵件
dispose Mail which come from inside company or customers
任職要求Requirement：
1.工程類相關專業 Engineering or related field
2. 熟悉產品流程設計 Be familiar with the process of product design
3.熟悉汽車行業線束、連接器、線圈或傳感器等零部件產品流程設計
Be familiar with the process of wire harness/connector/coil or sensor product design
4.熟悉汽車行業線束、連接器、線圈或傳感器等零部件生產流程、 產品設計、 測試和應用程序。
Be familiar with wire harness/connector/coil or sensor components production process flow, product design, testing and application.
5.熟悉汽車行業線束、連接器、線圈或傳感器等零部件開發流程，三年以上汽車行業設計工作經驗
Familiar with wire harness/connector/coil or sensor components development process, for more than three years working experience of product design in automotive industry
6.最少 5 年經驗，包括產品工程 3 年。
Minimum five years working experience, including 3 years in product engineering.
7.核心技能和素質Key Skills and Competency
能夠獨立設計產品生產流程。
Can independently the design production process.
良好的辦公自動化軟件，AUTOCAD 操作技能 ，Pro/E 或者其他三維制圖軟件
Good Office software ，AUTOCAD skills and Pro/E 3D skills or other 3D CAD application experience
具備敏銳的觀察能力，善于發現問題。
Good appetency
良好的人際交往能力。
Good human communication ability
具備較強的溝通能力/動手能力/學習能力
Great communication ability/ Excellent practical ability/ Quick Learning ability
個性特征 Personal Characters
思維活躍。a lively thinking
富有激情。Passionate
團隊意識強烈，善于與人合作。Good Team Players
敬業，富有奉獻精神。Respect work
樂觀進取。Optimistic and forward-looking
勤奮務實。Diligence and pragmatic
崗位職責Responsibilities:：
1.支持銷售和了解客戶應用程序和要求。實施適用的產品測試計劃以確保產品符合功能、 質量、 可靠性和機構的要求。
Support Sales/Marketing and understand customer application and requirements. Implement applicable product test plan to ensure product conformance to functional, quality, reliability and agency requirements.
2.初始設計失效模式分析預驗證和初始圖紙繪制
(Make DFMEA/e-Validation/ preliminary drawing)
3.培訓工程師相關的產品知識，工程程序和技術技能。
Train engineers on related product knowledge, engineering procedures and technical skill.
4.使用適當?shù)姆治龉ぞ邅?lái)分析和解釋數據，并得出相關結論。審查并驗證任何測試結果、 數據分析和結論為特定項目充分和準確。
Use appropriate analytical tools to analyze and interpret data, and reach relevant conclusions. Review and verify that any test results, data analysis and conclusions for a specific project are adequate and accurate.
5.發行二維和三維圖紙,制作手工樣品
Release 2d/3d approved /Make prototype when needed
6.與設計中心及兄弟工廠溝通協調，共同完成設計方案
Communicate with global design center and sister company design center to develop the design solution
7.處理公司內部或客戶郵件
dispose Mail which come from inside company or customers
任職要求Requirement：
1.工程類相關專業 Engineering or related field
2. 熟悉產品流程設計 Be familiar with the process of product design
3.熟悉汽車行業線束、連接器、線圈或傳感器等零部件產品流程設計
Be familiar with the process of wire harness/connector/coil or sensor product design
4.熟悉汽車行業線束、連接器、線圈或傳感器等零部件生產流程、 產品設計、 測試和應用程序。
Be familiar with wire harness/connector/coil or sensor components production process flow, product design, testing and application.
5.熟悉汽車行業線束、連接器、線圈或傳感器等零部件開發流程，三年以上汽車行業設計工作經驗
Familiar with wire harness/connector/coil or sensor components development process, for more than three years working experience of product design in automotive industry
6.最少 5 年經驗，包括產品工程 3 年。
Minimum five years working experience, including 3 years in product engineering.
7.核心技能和素質Key Skills and Competency
能夠獨立設計產品生產流程。
Can independently the design production process.
良好的辦公自動化軟件，AUTOCAD 操作技能 ，Pro/E 或者其他三維制圖軟件
Good Office software ，AUTOCAD skills and Pro/E 3D skills or other 3D CAD application experience
具備敏銳的觀察能力，善于發現問題。
Good appetency
良好的人際交往能力。
Good human communication ability
具備較強的溝通能力/動手能力/學習能力
Great communication ability/ Excellent practical ability/ Quick Learning ability
個性特征 Personal Characters
思維活躍。a lively thinking
富有激情。Passionate
團隊意識強烈，善于與人合作。Good Team Players
敬業，富有奉獻精神。Respect work
樂觀進取。Optimistic and forward-looking
勤奮務實。Diligence and pragmatic
職位類別： 產品規劃工程師
舉報
- 所在地區：上海-黃浦區
- 聯系人：葛小姐
- 手機：會員登錄后才可查看
- 郵箱：會員登錄后才可查看
- 郵政編碼：
工作地址
- 地址：上海莘莊工業區光華路1258號
